Door fit

c170b53 · Post by **c170b53** » Thu Mar 24, 2005 4:03 am

I replaced the skin on my pilot side door and I don't recall that it was spot welded anywhere. Some difficult rivets in the upper hinge area but not real bad. As mentioned the light construction should lend itself to tweaking.

Post by **Bruce Fenstermacher** » Thu Mar 24, 2005 2:21 pm

I have tried tweaking the door itself and I get a horrible wrinkle in the door skin so with out re-skinning that is probably out. A friend suggested we drill out a few (several) rivets and tweak and re-rivet but we cold only do that if we egg out the rivet holes which I don't want to do.