Blatantly plagiarized....but worth it!
HOW TO TORQUE WITH AN IMPACT WRENCH.
(Remember this is just a joke!)
Yes you can use your impact gun to torque nuts and bolts if you use this handy chart along with your ears and a quick trigger finger.
TORQUE VALUE INGERSOLL IMPACT SNAP-ON IMPACT
25 to 35 ft/lbs BAP! BAP!
35 to 45 ft/lbs BAP! BAP! BAP! BAP!
45 to 60 ft/lbs BAP! BAP! BA... BAP! BAP! BAP!
60 to 75 ft/lbs BAP! BAP! BAP! BAP! BAP! BAP! BA…
75 to 90 ft/lbs BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP!
90 to 100 ft/lbs BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP!
110 to 300 ft/lbs ALL GUNS BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP! BAP!
(Source - Bubba's Auto Teknikal Tips, 1123 Chaw Rd., Spit, TX 75999
How to Torque with an Impact Wrench (Humor)
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
How to Torque with an Impact Wrench (Humor)
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
- Posts: 517
- Joined: Thu Aug 12, 2004 10:33 pm
-
- Posts: 526
- Joined: Thu Dec 02, 2004 1:52 am
- Bruce Fenstermacher
- Posts: 10318
- Joined: Tue Apr 23, 2002 11:24 am
This technique works best when your using an off brand vise gripJr.CubBuilder wrote:I thought you just tightened with a wrench till it starts to loosen again and then back it off a quarter turn
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com