Not that it would be hard to make one, but I was curious if anyone knew of a source for the rubber landing gear "fillet" (P/N 0511125) that seals off the gear leg where it exits the fuselage? TIA!
Joe
4518C
Gear leg fillet
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 526
- Joined: Thu Dec 02, 2004 1:52 am
Re: Gear leg fillet
Hi joe,
I mentioned your name to Wayne out at Thun last week.
I use cut out pieces of innertube.
Regards,
Jim
I mentioned your name to Wayne out at Thun last week.
I use cut out pieces of innertube.
Regards,
Jim
A&P, IA, New owner C170A N1208D, Have rebuilt some 50 aircraft. So many airplanes, So little time!
Re: Gear leg fillet
N1235D - 1951 170A - SN: 20118
- Joe Moilanen
- Posts: 600
- Joined: Sun Dec 28, 2003 5:45 am
Re: Gear leg fillet
Thanks Jim, that's probably what I'll do.Metal Master wrote:Hi joe,
I mentioned your name to Wayne out at Thun last week.
I use cut out pieces of innertube.
Regards,
Jim
Joe