Page 3 of 4
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Sat Jul 28, 2018 12:05 am
by jwsowles
Dawley just made mine (right side) and I'm happy with it. They did not do it all in one piece but welded the tail bend. But the weld is under the cowl so not seen. If you go with it, I'd suggest being sure they get the angle of the bend out the muffler is correct as that affects the space between the pipe and the hanger. Mine is not 90 deg but more like 110. I had to extend the vertical about 2 inches so that the pipe was in the right position at the horizontal hanger. I don't have an STC but an old field approval. I also think it is not the Bartone but the Benham as shown by Miles. All in all, it worked out well and I'm satisfied.
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Sun Jul 29, 2018 3:23 am
by TFA170
...
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Thu Aug 02, 2018 5:16 pm
by n2582d
mit wrote:Are there Pic's of these with the cowl off?
Here's a picture that Jim Wildharber posted some years ago.
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Thu Aug 02, 2018 10:55 pm
by Poncho73
Those look awesome however, We need paperwork to cover the pipe mod.....is there paperwork available? I can get them made and installed in a day.....paperwork is needed
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Sat Oct 13, 2018 12:15 am
by TFA170
...
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Sat Oct 13, 2018 12:50 am
by GAHorn
I've got a reasonable mfr's bid on them...and am awaiting a discussion with Pat Bartone before proceeding.
George
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Sat Oct 13, 2018 6:29 pm
by Poncho73
gahorn wrote:I've got a reasonable mfr's bid on them...and am awaiting a discussion with Pat Bartone before proceeding.
George
Great let us know how it turns out!
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Sun Oct 14, 2018 1:08 pm
by IA DPE
Poncho73 wrote:
Great let us know how it turns out!
X2
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Thu Oct 18, 2018 6:28 pm
by hilltop170
gahorn wrote:I've got a reasonable mfr's bid on them...and am awaiting a discussion with Pat Bartone before proceeding.
George
Hey George-
Any way to expedite this process? I'm getting ready to take my plane to Del for a baggage door installation and I would really like to cover up those cowl holes while he has it in his shop.
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Thu Oct 18, 2018 6:38 pm
by lowNslow
There seems to be a lot of interest in this STC, would it make sense for the C170 Assoc. to acquire the STC from Pat if he is no longer interested in supporting it?
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Fri Oct 19, 2018 12:48 am
by Bruce Fenstermacher
I'm pretty sure Pat is not interested in selling to the 170 Association.
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Mon Nov 19, 2018 4:46 pm
by Sask170b
George , I'm still interested in a set. I will keep checking this post for an update. Mike
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Tue Nov 20, 2018 6:54 pm
by TFA170
...
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Wed Nov 21, 2018 12:52 am
by GAHorn
I'm still working on this... and will post when a solution is available. gh
Re: Wanted: Bartone Exhaust Extensions (merged topic)
Posted: Tue Dec 18, 2018 1:56 am
by Poncho73
Excellent. Thanks George