ADF antenna mast
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
ADF antenna mast
We will have N5000A (1st production 172) fully restored at OSH. One of the last pieces is the ADF antenna mast. In the pictures it almost looks like a wooden stick. We have the aluminum base but not the stick itself. Any help would be appreciated.
Re: ADF antenna mast
I have a mast from my '54 180 that might do the job.
If you are still in need, send me an e-mail or phone and I'll send pics to you of what I have.
Basically about 6" tall x 1" at base, tapering up to 1/2" at the top.
2 holes in lower portion for bracket and thin slit and hole for ADF wire to pass through at the top.
I removed my ADF a few years back and for some reason kept the mast - looks like mahogany or similar.
Painted same as my aircraft color however.
Frank
If you are still in need, send me an e-mail or phone and I'll send pics to you of what I have.
Basically about 6" tall x 1" at base, tapering up to 1/2" at the top.
2 holes in lower portion for bracket and thin slit and hole for ADF wire to pass through at the top.
I removed my ADF a few years back and for some reason kept the mast - looks like mahogany or similar.
Painted same as my aircraft color however.
Frank
Re: ADF antenna mast
I also have the holder and a piece of teak to make a stand for an amateur HF antenna that I thought about using a handheld.
John
John
John Hess
Past President 2018-2021
President 2016-2018, TIC170A
Vice President 2014-2016, TIC170A
Director 2005-2014, TIC170A
N3833V Flying for Fun
'67 XLH 900 Harley Sportster
EAA Chapter 390 Pres since 2006
K3KNT
Past President 2018-2021
President 2016-2018, TIC170A
Vice President 2014-2016, TIC170A
Director 2005-2014, TIC170A
N3833V Flying for Fun
'67 XLH 900 Harley Sportster
EAA Chapter 390 Pres since 2006
K3KNT
- 48RagwingPilot
- Posts: 144
- Joined: Wed Dec 12, 2012 3:28 am
Re: ADF antenna mast
I believe I kept the metal mast off my '48, so if interested....
Re: ADF antenna mast
The original was made of linen impregnated with phenolic resin, similar to aircraft pulleys and the elev. trim wheel.
It was originally intended for a long-wire communication antenna and later adapted for ADF and HF uses.
It was originally intended for a long-wire communication antenna and later adapted for ADF and HF uses.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Re: ADF antenna mast
WOW!
Where has that gahorn guy been hiding?
It's good to have you back George!
Where has that gahorn guy been hiding?
It's good to have you back George!
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
Re: ADF antenna mast
What the heck are you doin' UP at this hour???!!!
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.