does any one have a way of tightening up the steel neck on the oil filler as it goes into the Assy case? 
Oil Filler
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Oil Filler
Ok does any one have a way of tightening up the steel neck on the oil filler as it goes into the Assy case?
does any one have a way of tightening up the steel neck on the oil filler as it goes into the Assy case? Tim
Isn't that swaged into the case similar to the pushrod tubes attachment to the cylinder head? I don't know where you're going to get that tool unless a rebuilder has one to loan or TCM can advise you.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
Yep that it. I have been nursing it for years an it ain't getten any bettergahorn wrote:Isn't that swaged into the case similar to the pushrod tubes attachment to the cylinder head? I don't know where you're going to get that tool unless a rebuilder has one to loan or TCM can advise you.
I haven't tried to hard to find out. I guess I will call around... I will let you know what I find out.
Tim