vacuum pump

BobbyC · Post by **BobbyC** » Fri Dec 30, 2005 9:00 pm

Looking for a drive pully that goes to crankshaft for a belt driven vacuum pump

zero.one.victor · Post by **zero.one.victor** » Sat Dec 31, 2005 5:10 am

It'd probably be helpful to have a part number or/or manufacturer. Do you have the paperwork? The STC for that mod should have the p/n. If not, Arkansas Dave has a similar set-up on his 170 to drive the supercharger.

Maybe he has some paperwork with a part number.

Eric

mit · Post by **mit** » Sat Dec 31, 2005 5:44 am

The P/N is D6-2-2 (Split Sheave). I think the best bet is to call AVIALL; it is an Airborne Kit No. 312 I have rev K dated 2/20/86. It will be spendy

. Or call all the salvage yards...