It's finally finished! Well mostly finished anyway. It's good to be flying regularly again!!
Here is a link to some pics.
http://cessna1200.tripod.com/
jc
It's finally finished!
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
It's finally finished!
Last edited by N2865C on Fri Jul 23, 2004 3:08 pm, edited 1 time in total.
John's '54
You two have done a really fine job of restoring a beautiful airplane! It really looks sharp. Now bring it to the 2005 convention so we can see it in the flesh (aluminum).
OLE POKEY
170C
Director:
2012-2018
170C
Director:
2012-2018
- cessna170bdriver
- Posts: 4063
- Joined: Mon Apr 22, 2002 5:13 pm
-
- Posts: 476
- Joined: Wed May 15, 2002 2:25 am
VERY NICE JOB!!! But, from the pictures I couldn't tell for sure if you kept
the original 20 inch wing N numbers - (the picture of the finished polish job was dark under the wing.) Russ Farris, President of the 170 Historical Sticklers Society!!!
historical sticklers Society
the original 20 inch wing N numbers - (the picture of the finished polish job was dark under the wing.) Russ Farris, President of the 170 Historical Sticklers Society!!!
historical sticklers Society
All glory is fleeting...
It's finally finished!
Great website and great plane! I can appreciate just what time and effort you are investing. I'm in the middle of the same project. Polishing is tedious but rewarding. Are you using the Nuvite system? I'd like to swap any polishing tips based on your experiences.
Thanks for all the good feedback,
To answer all of your questions:
I had it ready for the convention and planned on coming. Unfortunately due to a family emergency I was unable to attend. Too bad because it was so close.
As for originality, I did not put on the big N numbers on the wing. I live in one of the most beautiful flying areas in the world, and it's filled with tree huggers. Now of course I would NEVER fly up the coast at 200 ft., but I figured that the numbers can always be added later. I also added two slash type pockets to the interior front side panels. No pockets just did not make sense.
My biggest sin (George, hang on to your pacemaker) was to paint the wings a metallic silver. I left the leading edges polished and you really have to look twice before you notice. The bottoms of the wings and control surfaces just had too much surface pitting to polish without reskinning. Living along the coast, I'm sure that I won't miss polishing the underside of the wings. Other than that, it looks just like the original sales brochure.
I do use Nuvite. Lots of work, but the results are great. Every skin seems to be a little different. Mostly I have had good results compounding with G6 or F7 - Polishing with G6 and then final polish with S. I find that it is more art than science.
jc
To answer all of your questions:
I had it ready for the convention and planned on coming. Unfortunately due to a family emergency I was unable to attend. Too bad because it was so close.
As for originality, I did not put on the big N numbers on the wing. I live in one of the most beautiful flying areas in the world, and it's filled with tree huggers. Now of course I would NEVER fly up the coast at 200 ft., but I figured that the numbers can always be added later. I also added two slash type pockets to the interior front side panels. No pockets just did not make sense.
My biggest sin (George, hang on to your pacemaker) was to paint the wings a metallic silver. I left the leading edges polished and you really have to look twice before you notice. The bottoms of the wings and control surfaces just had too much surface pitting to polish without reskinning. Living along the coast, I'm sure that I won't miss polishing the underside of the wings. Other than that, it looks just like the original sales brochure.
I do use Nuvite. Lots of work, but the results are great. Every skin seems to be a little different. Mostly I have had good results compounding with G6 or F7 - Polishing with G6 and then final polish with S. I find that it is more art than science.
jc