BAS shoulder harness recommendations

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

User avatar
c170b53
Posts: 2527
Joined: Mon Apr 22, 2002 8:01 pm

Re: BAS shoulder harness recommendations

Post by c170b53 »

Tim for standby on duty rocket engineer :D
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
User avatar
ghostflyer
Posts: 1390
Joined: Mon Apr 21, 2008 3:06 am

Re: BAS shoulder harness recommendations

Post by ghostflyer »

When designing some thing I always look at what has happen in the past and it's parent product and how it is redesigned today . It's all about compromise.for example look how cessna bolts their front lap sash belts to the center part of the ceiling in the lastest models The structure that the enertia reels are attached to is very interesting design. The old days of attaching it to the door pillar is gone . Why we must ask? Cessna has done a lot of research on survivably . While some 30 year old designs/materials are legal ,there are better and improved concepts around but at a cost.
[ note. I always get a second or a third opinion on a idea /concept before it goes into production as some times my " rose colored glasses get foggy with my enthusiasm.]
This conversation has really gone on a wander into the mist , but basically what I said originally the nut plate that is retapped out because of crossed threads was a bad idea , I would be replacing the the nut plate .
swixtt
Posts: 206
Joined: Wed Dec 10, 2014 6:49 pm

Re: BAS shoulder harness recommendations

Post by swixtt »

Why stop now? It has been a good read! :lol: :lol:
Post Reply