L-19 tow lugs on 180 gear legs
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
learaviator
- Posts: 174
- Joined: Wed Dec 31, 2008 5:20 pm
L-19 tow lugs on 180 gear legs
I purchased a set of these for my 170 that has 180 gear legs. The lower bolts in my gear are -6 bolts and of course the lugs are drilled for -5 bolts. I am planning to drill the lugs out for the larger bolts. Or I could put them on the upper two bolts. Has anyone else been through this? Just trying not to re-invent the wheel LOL
"You can only tie the record for flying low"
1950 170A N9907A 180hp. STOL
1950 170A N9907A 180hp. STOL
-
hilltop170
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Re: L-19 tow lugs on 180 gear legs
Just happened to take this picture yesterday after landing at a friend’s grass runway.
Del Lehman at Mountain Airframe installed these L19 tow lugs last year.
Del Lehman at Mountain Airframe installed these L19 tow lugs last year.
- L-19 Tow Lug installation
Last edited by hilltop170 on Wed Apr 01, 2020 5:42 pm, edited 1 time in total.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
-
learaviator
- Posts: 174
- Joined: Wed Dec 31, 2008 5:20 pm
Re: L-19 tow lugs on 180 gear legs
Awesome! That's how I will do it! Thank You!
"You can only tie the record for flying low"
1950 170A N9907A 180hp. STOL
1950 170A N9907A 180hp. STOL