Does anyone have one of these Switch Limit Clips (PN 0411889) or know where I can get one? I'm adding a switch to my piano keys for strobe lights and would like the key to have the limit like the rest of them. I haven't had any luck finding one online.
Thanks,
Doug
Need Switch Limit Clip
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Need Switch Limit Clip
N1235D - 1951 170A - SN: 20118
Re: Need Switch Limit Clip
Do you want the part that is fastened by the switch mounting nut? The "J" shaped piece.
If so, let me know and I will send you one.
John
If so, let me know and I will send you one.
John
John Hess
Past President 2018-2021
President 2016-2018, TIC170A
Vice President 2014-2016, TIC170A
Director 2005-2014, TIC170A
N3833V Flying for Fun
'67 XLH 900 Harley Sportster
EAA Chapter 390 Pres since 2006
K3KNT
Past President 2018-2021
President 2016-2018, TIC170A
Vice President 2014-2016, TIC170A
Director 2005-2014, TIC170A
N3833V Flying for Fun
'67 XLH 900 Harley Sportster
EAA Chapter 390 Pres since 2006
K3KNT
Re: Need Switch Limit Clip
n3833v wrote:Do you want the part that is fastened by the switch mounting nut? The "J" shaped piece.
If so, let me know and I will send you one.
John
Thanks, John. I sent you a PM.
Doug
N1235D - 1951 170A - SN: 20118
-
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Re: Need Switch Limit Clip
As an alternative to adding a switch-stop on the strobe switch, if you have a rotating beacon or strobe replacing the beacon, you could consider adding a 3-position switch with the beacon-only position up and strobe and beacon position down, with off in the center.
Then, you could leave the switch up so the beacon-only will indicate to others you are ready to start up or that you left the master switch on after shutdown.
Then, you could leave the switch up so the beacon-only will indicate to others you are ready to start up or that you left the master switch on after shutdown.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
Re: Need Switch Limit Clip
Richard,hilltop170 wrote:As an alternative to adding a switch-stop on the strobe switch, if you have a rotating beacon or strobe replacing the beacon, you could consider adding a 3-position switch with the beacon-only position up and strobe and beacon position down, with off in the center.
Then, you could leave the switch up so the beacon-only will indicate to others you are ready to start up or that you left the master switch on after shutdown.
That would work too. I don't currently have a beacon or strobes so I think I'll just add a switch for the strobes.
N1235D - 1951 170A - SN: 20118
-
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Re: Need Switch Limit Clip
You could always go ahead and install a 3-way switch now in case you ever wanted a separate switch position for a beacon/single strobe. Down for strobes on and nothing in the up position. It's easy to see if you do position it up but nothing will happen.
I had Del Lehman wire my landing lights in the up position and taxi lights in the down position on the same switch, off in the center. I needed another switch position when the Pulse-Light was added.
I had Del Lehman wire my landing lights in the up position and taxi lights in the down position on the same switch, off in the center. I needed another switch position when the Pulse-Light was added.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
Re: Need Switch Limit Clip
I agree and will be using a three position switch (all of them are three positions switches), but at this time I plan on a separate strobes switch.
Doug
Doug
N1235D - 1951 170A - SN: 20118