1948 Cessna 170 flap stop bolt flange
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 2
- Joined: Sat Jun 22, 2019 8:57 pm
1948 Cessna 170 flap stop bolt flange
Sorry guys, I need some help… I have gone through the parts book and I cannot find the flange that rivets to the trailing edge of the wing that the flap stop bolt mounts to… Does anybody have a part number or possibly know where I can obtain one?
Re: 1948 Cessna 170 flap stop bolt flange
Edit my mistake a 48 fabric wing, as usual knot thinking.
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
1953 C170B S/N 25656
02 K1200RS
Re: 1948 Cessna 170 flap stop bolt flange
I believe it’s the same thing item number 4-55 part number AN366F-1032 on both models, if indeed this is what you’re looking for
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
1953 C170B S/N 25656
02 K1200RS
- sfarringer
- Posts: 309
- Joined: Wed Jan 12, 2005 10:49 pm
Re: 1948 Cessna 170 flap stop bolt flange
Here is a picture of the AN366 nut plate for the flap stop on my '48 (I didn't really remove the fabric just for this photo.....)
Ragwing S/N 18073
- Bruce Fenstermacher
- Posts: 10318
- Joined: Tue Apr 23, 2002 11:24 am
Re: 1948 Cessna 170 flap stop bolt flange
The stop bolt goes into a nut plate on the rear auxiliary spar. For the left side this can be seen in page 8, figure 4 number 56 of the IPC. The listing for this part doesn't show up til page 11. Of course the right wing would be identical but listed in a different figure on another page.
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com