1948 Cessna 170 flap stop bolt flange

How to keep the Cessna 170 flying and airworthy.

Moderators: gahorn, Karl Towle, Bruce Fenstermacher

1948 Cessna 170 flap stop bolt flange

Postby Seandavis333 » Fri Jan 24, 2020 12:17 am

Sorry guys, I need some help… I have gone through the parts book and I cannot find the flange that rivets to the trailing edge of the wing that the flap stop bolt mounts to… Does anybody have a part number or possibly know where I can obtain one?
Seandavis333
 
Posts: 1
Joined: Sat Jun 22, 2019 8:57 pm

Re: 1948 Cessna 170 flap stop bolt flange

Postby c170b53 » Fri Jan 24, 2020 4:45 am

05414C38-F1CC-4B00-9F15-5FCB873F7C38.jpeg

This ? ( 170A training edge in pic)
Edit my mistake a 48 fabric wing, as usual knot thinking.
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
User avatar
c170b53
 
Posts: 2037
Joined: Mon Apr 22, 2002 8:01 pm
Location: Vancouver B.C.

Re: 1948 Cessna 170 flap stop bolt flange

Postby c170b53 » Fri Jan 24, 2020 5:03 am

I believe it’s the same thing item number 4-55 part number AN366F-1032 on both models, if indeed this is what you’re looking for :D
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
User avatar
c170b53
 
Posts: 2037
Joined: Mon Apr 22, 2002 8:01 pm
Location: Vancouver B.C.

Re: 1948 Cessna 170 flap stop bolt flange

Postby sfarringer » Fri Jan 24, 2020 8:27 pm

Here is a picture of the AN366 nut plate for the flap stop on my '48 (I didn't really remove the fabric just for this photo.....)

IMG_20200124_151331095.jpg
Ragwing S/N 18073
User avatar
sfarringer
 
Posts: 265
Joined: Wed Jan 12, 2005 10:49 pm
Location: Indiana

Re: 1948 Cessna 170 flap stop bolt flange

Postby Bruce Fenstermacher » Fri Jan 24, 2020 11:08 pm

The stop bolt goes into a nut plate on the rear auxiliary spar. For the left side this can be seen in page 8, figure 4 number 56 of the IPC. The listing for this part doesn't show up til page 11. Of course the right wing would be identical but listed in a different figure on another page.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email:
N7A '49 170A -More original than most making folks GREEN with envy
N42532 '45 J-3 Clipped Wing Cub
User avatar
Bruce Fenstermacher
 
Posts: 9604
Joined: Tue Apr 23, 2002 11:24 am
Location: Telford, PA Based at UKT


Return to The Hangar

Who is online

Users browsing this forum: Google [Bot] and 27 guests