Gear Legs

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
EdAuker
Posts: 5
Joined: Mon May 08, 2017 6:14 pm

Gear Legs

Post by EdAuker »

Wanted to keep a great vendor available to those looking for landing gear work. North Sound Aviation, Jim Hayton did spectacular work for me, reasonably priced with a quick turn around.

Likely the best experience I’ve ever had with any business.

He was hard for me to find, but his contact information was here in The Hangar, but buried deep in a topic somewhere. I wanted to make him a bit easier to find.
User avatar
Bruce Fenstermacher
Posts: 10313
Joined: Tue Apr 23, 2002 11:24 am

Re: Gear Legs

Post by Bruce Fenstermacher »

So how about reposting his contact info?
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
User avatar
EdAuker
Posts: 5
Joined: Mon May 08, 2017 6:14 pm

Re: Gear Legs

Post by EdAuker »

My Google-Foo isn't very sharp, but I found Jim is in Sedro Woolley, WA. I am not posting his number because he has several numbers listed and I'm not sure which is current especially 5 years from now when someone finds this thread. And I don't want his number overwhelmed with junk calls from the internet data miners.

In my dotage, I'm getting kinda flinchy. ...and even my flinch is delayed and slow :^)
Ed
User avatar
Bruce Fenstermacher
Posts: 10313
Joined: Tue Apr 23, 2002 11:24 am

Re: Gear Legs

Post by Bruce Fenstermacher »

No problem Ed, I thought you might have a business phone which certainly he wouldn't mind us knowing. But if you are unsure best not to post it.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Post Reply