1948-170 Landing light
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- mike.bernath
- Posts: 24
- Joined: Mon Mar 26, 2018 5:56 pm
1948-170 Landing light
The switch panel has a labeled switch for the landing light. However the aircraft wasn’t optioned for it. How big of a chore is this going to be and are there options available besides splitting the fabric open? It would be nice to have a landing light. Thanks!
- BWeathered
- Posts: 30
- Joined: Mon Jul 17, 2006 1:34 am
Re: 1948-170 Landing light
In earlier days, you could install a leading edge light based on the similarity to the ones installed on the A and B models, using a 337. There is one 337 on file at the TIC170A web page in the MX section. Not sure if the average FAA inspector will sign off on those any more without a DER approval, as they have gotten very unhelpful in this regard.