My 170B has Cleveland 7.00 x 6 wheels installed. Eventually I'd like to find some wheel pants that will fit them, but until then I'd like to find some hubcaps. I intended to make my own but the tube stem sticks out far enough I'm afraid a flat cover would put it in too much of a bind.
Any idea where I can find hubcaps for 7.00 x 6 wheels? I checked the Univair and Aircraft Spruce catalogs with no luck.
Regarding wheel pants, I found an old thread listing someone who made Carbon Fiber pants, but the website is not current and the email bounced back
7.00 x 6 Hubcaps
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
7.00 x 6 Hubcaps
1955 C170B N2993D s/n 26936
1986 DG-400 N9966C
1986 DG-400 N9966C
Re: 7.00 x 6 Hubcaps
Are you sure you have Cleveland 7.00 x 6 wheels and not 700 x 6 tires on a Cleveland 6.00 x 6 wheel hub part 40-97a?
Pete Brown
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
Re: 7.00 x 6 Hubcaps
Karl
'53 170B N3158B SN:25400
ASW-20BL
'53 170B N3158B SN:25400
ASW-20BL