Does anyone have a set of drawings/documentation to install a float kit in a 170?
I have all the parts collected but no supporting paperwork just yet.
Float Kit drawings
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Re: Float Kit drawings
Depending on the model, I sent a copy of my float kit install drawing that I received from Cessna to the association via G. Horn .The only snag was that the drawings where specific to my serial number, 1955 170b. Check with the association, as I thought I still had a copy around here,but am unable to locate it or I would send it
-
- Posts: 449
- Joined: Mon Dec 13, 2010 3:49 am
Re: Float Kit drawings
I sent my drawings from Cessna to the club years ago. If you cannot get them I can supply them.
It's not done till it's overdone
Re: Float Kit drawings
Bill, I had your drwgs scanned to a pdf file and emailed to a Member recently. I also thought I'd posted them but will follow up to be certain.
Here it is (Edo 2000s): http://cessna170.org/forums/viewtopic.php?f=40&t=13825
Here it is (Edo 2000s): http://cessna170.org/forums/viewtopic.php?f=40&t=13825
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
Re: Float Kit drawings
I got mine out of a bone yard from a wrecked bird with a float kit.