Since the A model does not have a counter balance on the elevator, is there a requirement to balance after painting? The SB shows "None Specified" in the column for weight on both elevators, The B model shows a weight value.
Thanks in advance
A model elevator balance
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
A model elevator balance
Fly safe!
Vern
1950 C-170A N5453C sn 19487
Based in Pensacola, FL. 82J
Vern
1950 C-170A N5453C sn 19487
Based in Pensacola, FL. 82J
Re: A model elevator balance
The rigging instructions are contained in the Mx Library. The 170A elevator balance is discussed on Page 6. Balance limits are 0.0 to +67.3
http://cessna170.org/forums/viewtopic.php?f=41&t=8196
http://cessna170.org/forums/viewtopic.php?f=41&t=8196
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.