We are building a flight simulator for a local high school aviation program. We need 4 of the yoke grommets. Does anyone have some used ones ? and willing to pat with them?
Thanks, Rick Jones 828-389-0528
Control yoke grommets
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- Bruce Fenstermacher
- Posts: 10313
- Joined: Tue Apr 23, 2002 11:24 am
Re: Control yoke grommets
By yoke grommets, you mean the white plastic ball with a hole in it? If so McMaster Carr sells 1 1/2" balls that could be drilled for $3.58 ea. I don't think the 1" would work but they are $11.43 for 10.
https://www.mcmaster.com/#standard-plas ... s/=16q5q4j
Alternately, because you don't need then certified, they could be easily cut by someone to size with a lathe and a ball turner. I don't have a ball turner or I could help.
Of course perhaps someone has a stash of 4 of these used and not needed.
https://www.mcmaster.com/#standard-plas ... s/=16q5q4j
Alternately, because you don't need then certified, they could be easily cut by someone to size with a lathe and a ball turner. I don't have a ball turner or I could help.
Of course perhaps someone has a stash of 4 of these used and not needed.
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Re: Control yoke grommets
Rick, contact me via PM or email and I bet we can help.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.