I am in need of a good serviceable 170B vertical and horizontal stabilizer. its a 1956. I am at KFUL in southern California. hopefully we can find some near. I am also looking for new or serviceable 0510000-34 tail wheel spacers (wedge) qty 2. Item #33 figure 25 tail cone assembly. Mine are exfoliating with corrosion.
Thank you guys.
Ben Kellogg
Ben's Motorworks
4119 W Commonwealth Ave Hangar D28
Fullerton CA 92833
714-396-6090
170B stabilizors
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- Bruce Fenstermacher
- Posts: 10313
- Joined: Tue Apr 23, 2002 11:24 am
Re: 170B stabilizors
Ben, I'm told the Association owns one or more NOS vertical stabilizers. Last I heard they were in the possession of George Mock in Indiana. George Horn is our parts and maintenance coordinator and there was talk of George M getting them to George H in Texas. Doubt that has ever happened. I'd call George M. first and see if he knows of the where-a-bouts of them and maybe more info on them. George H will likely be involve determining their value.
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
- bensmotorworks
- Posts: 42
- Joined: Tue Jan 24, 2017 12:09 am
Re: 170B stabilizors
Thank you Bruce.
Ben
Ben
Re: 170B stabilizors
Welcome Ben!
I'm away from home now but once I return I could try and get some measurements of those wedges if you wanted to try making an owner produced part.
I'm away from home now but once I return I could try and get some measurements of those wedges if you wanted to try making an owner produced part.
Gary
- bensmotorworks
- Posts: 42
- Joined: Tue Jan 24, 2017 12:09 am
Re: 170B stabilizors
Thank you N258D, let me know what you come up with.
- Bruce Fenstermacher
- Posts: 10313
- Joined: Tue Apr 23, 2002 11:24 am
Re: 170B stabilizors
On the wedges, you need to appeal to folks who recently replaced their entire bracket with a new "kit" from Air Repair. The kit comes complete with new wedges and so their old wedges would be surplus. You might also call Air Repair and inquire if they have the wedges separate. Maybe they have some good used laying around.
http://www.airrepairinc.com/
They wouldn't be hard to make either and that would be my route.
http://www.airrepairinc.com/
They wouldn't be hard to make either and that would be my route.
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
- bensmotorworks
- Posts: 42
- Joined: Tue Jan 24, 2017 12:09 am
Re: 170B stabilizors
Thank you again Bruce, I ordered NOS ones from the guys at Air Repair. Less than $10.00 ea.