Delco-Remy
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Delco-Remy
Can't remember where the data is on our starters and what seals and bushings are required for the adapter (not the motor itself).
OLE POKEY
170C
Director:
2012-2018
170C
Director:
2012-2018
Re: Delco-Remy
The mx instructions for adjustment, etc are in the back of the engine Ovhl manual. But I thought you had a litewt starter?
Here's a link which might help: http://cessna170.org/forums/viewtopic.p ... hes#p58503
and another:
http://cessna170.org/forums/viewtopic.p ... ber#p97674
The adaptor seal is (first choice) National Seal 5324-S or (second choice) Chicago RawhideCR9859.
The Delco-Remy number is PN 1910379. Try Spruce for that. The starter armature seal DR part no is PN 1867150.
Here's a link which might help: http://cessna170.org/forums/viewtopic.p ... hes#p58503
and another:
http://cessna170.org/forums/viewtopic.p ... ber#p97674
The adaptor seal is (first choice) National Seal 5324-S or (second choice) Chicago RawhideCR9859.
The Delco-Remy number is PN 1910379. Try Spruce for that. The starter armature seal DR part no is PN 1867150.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.