Search found 8737 matches
- Wed Jun 19, 2002 10:53 pm
- Forum: The Hangar
- Topic: ELEVATOR TRIM RIGGING
- Replies: 2
- Views: 11614
elevator trim rigging
What elevator do you have. The trim changed from the A model to the B model. The '48 170 is the same as the A model. Few people seem to realize there is a difference. If your trim hinge runs from the back edge of the elevator to the back edge of the elevator you have the early unbalanced elevator. I...
- Tue Jun 18, 2002 12:07 pm
- Forum: The Hangar
- Topic: Vortex generators
- Replies: 8
- Views: 20479
VGs
I love my VGs and highly recommend them. The Micro Vortex kit is one of the most complete kits I have ever seen. Besides the paint, alcohol and paper towels or rags you can drive right out to the plane with just their kit and a step ladder and you'll have everything needed to complete the installati...
- Fri Jun 07, 2002 4:43 pm
- Forum: The Hangar
- Topic: Fuel valve rebuild and manual mistake WARNING
- Replies: 108
- Views: 250395
fuel selector valve rebuild
I gave the o-ring numbers that the cessna part numbers cross reference to. The 29513 rings although some what common are the same as other more common rings which I can't remember the number (according to the Parker 0-ring cross reference guide.) I'm not sure if the M83248/1 will cross to any thing....
- Fri Jun 07, 2002 1:00 pm
- Forum: The Hangar
- Topic: Fuel valve rebuild and manual mistake WARNING
- Replies: 108
- Views: 250395
I forgot an o-ring - A complete fuel valve parts list
My appologies. I forgot one of the o-rings in my previous post. So much for proof reading. :roll: Complete fuel valve rebuild parts list for newer machined fuel valve found in B model and some A model 170s: 2 - o-ring MS29513-012 2- o-ring MS29513-116 1- o-ring MS29513-111 1- o-ring M83248/1-010 1- ...
- Fri Jun 07, 2002 12:52 pm
- Forum: The Hangar
- Topic: Fuel valve rebuild and manual mistake WARNING
- Replies: 108
- Views: 250395
Fuel valve rebuild and manual mistake WARNING
I just got done rebuilding my fuel selector valve. I have the newer valve found in the B model shown on page 106 of the 170B parts catalog. It is the valve that is machined out of square stock as opposed to the older one that looks like it has a forged body. WARNING Looking at my valve while I disas...
- Thu May 09, 2002 8:24 pm
- Forum: The Hangar
- Topic: 175 wings on 170/172
- Replies: 2
- Views: 15148
175 WINGS ON 170/172
My 170A has L-19 wings installed. The basis for approval was a letter from Cessna outlining what wings could be used as replacements. Basically any wing the same size and airfoil as original with the same type fuel system and flap system installed, from an aircraft with the same gross weight or high...
- Wed Apr 24, 2002 9:56 pm
- Forum: The Pilot Lounge
- Topic: Seat Rails
- Replies: 3
- Views: 14299
Seat Rails
It's time to replace my seat rails. I've noticed them advertised several places and that there seem sto be different models ie some are thicker than stock.
What is the favorite flavor of seat rail and where is the best plac eto purchase them.
Thanks
What is the favorite flavor of seat rail and where is the best plac eto purchase them.
Thanks