The International Cessna 170 Association

George,
I've found a good deal on a left strut from a C-175. Would you--or anyone else out there-know off-hand if this strut would fit my '52 C-170B? The 170B manual lists the part as p/n 0523606-10 but I think it may have been revised to a -12. The seller doesn't know the p/n off his 175 strut.

The engine I dream about putting on a 170 is the Zoche diesel. It would make the 170 look like a mini C-195. Unfortunately, the designer has said it will be ready "next year" for the last 15 years. See http://www.zoche.de/specs.html.

Thanks for the info. I was curious as another local 170B owner is rigging his plane. With the flaps lined up to the trailing edge fairings on the fuselage and the inboard ailerons lined up with the outboard edge of the flaps one aileron tip is about an inch from lining up with the wing tip while the...

I was looking for the correct amount of wing twist for the 170 wing but was unable to find it in the 100 series service manual. Does anybody know where to find this information?

The 100 Series Service Manual - 1962 and Prior and the Model 170 Series Parts Catalogs are also available in CD format from McCurtain Technology Group http://www.mccurtaintg.com

According to the FAA's website the aircraft has been deregistered. It did have the s/n of 18740.

Dave, The 16 page "tech note #14" is copyrighted. In addition to the article on rigging I've found CPA has a lot of other useful information as I rebuild my C-170B. Especially informative is their 172 forum where members with older 172s discuss issues related to their O-300. Another forum ...

Bert, How much higher is one side than the other? On my C-170B the trailing edge of the right side fillet is 472 mm above the top of the side fuselage aluminum panel and 468 mm on the left side. In looking at the parts catalog I see that the part number for the fillets is different between the A and...

The following is part of a thread on another website concerning adding an oil cooler to the O-300D: "reguards (sic) oil temp: on my 0-300 which gets hot in arizona desert temps of 110 degree. I added a stewart warner oil cooler, and a remote oil filter. the cooler is mounted on the rt bafle (si...

Gerry,
I think the nearest thing to a service manual for the 170 is Cessna's 1962 and prior manual for the 100 series aircraft. It is available from McCurtain for $20. http://www.mccurtaintg.com/

Bill,
The sources I have for steel axles are Williams Aircraft, 915/944-8558, and http://www.supercubs.com/parts.html

This is from msg. #4748 on the old site:

There is a shop in Kelowna BC who does an approved ( in Canada ) epoxy repair on sumps . Okanokan Aero Engines , ask for Fred . They did a great job on my 0 300 at overhaul last year .

This is from msg. #4748 on the old site:

There is a shop in Kelowna BC who does an approved ( in Canada ) epoxy repair on sumps . Okanokan Aero Engines , ask for Fred . They did a great job on my 0 300 at overhaul last year .

George, Thanks for the new site. I really appreciate all the work you've done in making this a reality. Would it be possible to compile a list of recommended sources for C-170 parts? Maybe it could be placed in The Hangar, The MX Library, or in a members-only area. The latter might encourage C-170 o...