The International Cessna 170 Association

Thanks for grabbing those pics! That looks great, so easy to remove when not needed! Now I wonder why we see so little of this type. I believe this is factory?

Thanks, i thought so.

the other plug in my right master cylinder is actually drilled on the side at a 45deg just above the threads. the left plastic plug is yellow and slotted like you describe and i can't quite make out where it is vented. assume it is probably like what you mentioned.

My '54 B model has rear seat shoulder harnesses. I'm not sure where they attach, but I assume it's the same as David showed. I'll get a picture of the attach points and post. older thread, i know. wondering Dave if there was a chance you could post that pic here? i'm really thinking of getting some...

Thanks guys, i'll be getting a few of the plastic ones from Spruce on my next order.

When that top tab is removed should i put the machine screw back into the top the of the master cylinder?

I just installed new brakes on my 170b with new lower Aeroquip lines :D . when i was looking at the master cylinders i see that my Parking brake tabs, springs are still there(cable has long been removed). after reading about this on the forum, i understand this is still a problem. can i remove those...

Congrats!! You are really going to enjoy that upgrade.

I'm very curious how this would perform in negative temps!

Yikes. That is an unfortunate story. Thanks for the details Horn... Always listening.

Great looking plane. Will be checking in for other pics when you get them posted.

Well that is very good info. I had no idea such a part existed!

David how many different ver existed in the b models?
You selling some soon perhaps?

I believe he is referring to what was IN your plane when they rolled it off the line. 100s of planes don't have anything for a speaker. Heck they don't even have a radio. And there are a 100 other things I put ahead of this however I like having mine operational. Mostly because it was there and both...

i found a used replacement 4ohm speaker. ended up mounting it to the outside of the frame instead of the inside. it was just a little too tall to fit up against the roof. in fact the old one touches the roof skin anyway. i cleaned up the lights and the plastic cover, fixed the interior light. speaki...

That is one heck of a new 170b fishdoc. My favourite one now !!

Or the 15gal stc from Chris.
I have the Bush stol kit on my 170sb

That is similar to what i'm seeing for fuel burn too. i do see lower when i'm just cruising around which of course my FS450 is very handy for. i programmed mine to work with 37gal.