I want to install a single probe EGT on my 170B with the C145.
My question is has anyone done it?
What cyl did you install it on and how does it work?
Dick
1954 C170B
N2704C
Search found 49 matches
- Mon Oct 03, 2022 9:29 pm
- Forum: The Hangar
- Topic: EGT setup
- Replies: 9
- Views: 14878
- Fri Nov 05, 2021 10:26 pm
- Forum: The Hangar
- Topic: AN gyro wandering
- Replies: 4
- Views: 4750
Re: AN gyro wandering
I am sorry.
AQI did the rebuild in KS not KC.
Dick
AQI did the rebuild in KS not KC.
Dick
- Fri Nov 05, 2021 3:40 pm
- Forum: The Hangar
- Topic: AN gyro wandering
- Replies: 4
- Views: 4750
AN gyro wandering
Hello All My AN style Direction Gyro was wandering. I sent it to KC for rebuild and reinstalled. It still wanders. They will check it out for me but before I send it back i want to know if there is something I should be doing first. It is plumbed exactly like the Cessna parts book shows except that ...
- Sat Apr 24, 2021 3:17 am
- Forum: The Pilot Lounge
- Topic: Label on Battery Box
- Replies: 3
- Views: 4242
Label on Battery Box
Hi all
I cleaned up my battery box today and I can see where the cover had a label about 3.5 by 4 inches on the cover at one time.
Anybody have a photo of an original label?
Dick Bryant
54 170B
26248
I cleaned up my battery box today and I can see where the cover had a label about 3.5 by 4 inches on the cover at one time.
Anybody have a photo of an original label?
Dick Bryant
54 170B
26248
- Fri Sep 25, 2020 11:05 pm
- Forum: The Hangar
- Topic: F&M Oil filter adapter AND THREAD DRIFT-LOL
- Replies: 79
- Views: 50664
Re: F&M Oil filter adapter AND THREAD DRIFT-LOL
Look up FM filter adapter on the internet. I just stumbled on to 7 pages of instructions to install and check for leaks. This is dated Oct 2019. To torque the adapter, install a wood block between the adapter and the engine block to prevent turning when torquing. They now want you to safety wire the...
- Fri Jul 17, 2020 10:43 pm
- Forum: The Hangar
- Topic: 48 170 fuel pump costs
- Replies: 10
- Views: 8045
Re: 48 170 fuel pump costs
Call Mike in the shop at Then and Now Automotive Weymouth MA. 781-335-8860
He rebuilds fuel pumps for antique cars all the time. He may have a core for you.
He rebuilds motor mounts. He made a mold and made rubber cowling mounts for a 985 in a Beech 18 for a friend of mine.
Dick Bryant
N2704C
He rebuilds fuel pumps for antique cars all the time. He may have a core for you.
He rebuilds motor mounts. He made a mold and made rubber cowling mounts for a 985 in a Beech 18 for a friend of mine.
Dick Bryant
N2704C
- Sat Jan 04, 2020 10:47 pm
- Forum: The Pilot Lounge
- Topic: Upgraded Battery Chargers
- Replies: 9
- Views: 13357
Re: Upgraded Battery Chargers
And when I install that Concord battery in my 1954 170 it is being charged with a 35 amp generator through a vibrating points regulator designed about 1930.
Dick Bryant
1954 170b
Now with an alternator
Dick Bryant
1954 170b
Now with an alternator
- Thu Dec 12, 2019 1:30 am
- Forum: The Hangar
- Topic: BC433-H Alternator STC
- Replies: 4
- Views: 10813
Re: BC433-H Alternator STC
Hi Jud I bought a rebuilt engine for my 54 170B from a gentleman who had rebuilt it for his home built. 70 hours on it now and runs great. It came with BC-433 alternator and regulator. The FAA held me up for 3 months for approval despite the fact that I supplied all the paperwork that this alternato...
- Tue Nov 05, 2019 6:52 pm
- Forum: The Hangar
- Topic: 8 day clock
- Replies: 9
- Views: 19865
8 day clock
Hi All
My 8 day clock can not be wound.
Anybody know where to have it repaired?
I see online I can get a used one for about 100 dollars, but I don't know how worn it would be.
Thommen on the face.
Wakmann Watch Co on the rear case.
Thanks
Dick Bryant
N2704C
My 8 day clock can not be wound.
Anybody know where to have it repaired?
I see online I can get a used one for about 100 dollars, but I don't know how worn it would be.
Thommen on the face.
Wakmann Watch Co on the rear case.
Thanks
Dick Bryant
N2704C
- Mon Sep 30, 2019 12:09 am
- Forum: The Hangar
- Topic: Crankcase Vent Tube
- Replies: 2
- Views: 10440
Re: Crankcase Vent Tube
Thanks
I do remove the oil cap and give it a shake to get rid of the condensate after shut down.
Dick
I do remove the oil cap and give it a shake to get rid of the condensate after shut down.
Dick
- Sun Sep 29, 2019 9:16 pm
- Forum: The Hangar
- Topic: Crankcase Vent Tube
- Replies: 2
- Views: 10440
Crankcase Vent Tube
Hi All
Where should my crankcase tube terminate?
Mine is about 2 inches above the bottom lip of the cowl. The cowl has a 1.5 inch lip.
Does this sound right?
Mine drips a yellow goo when shut down.
Dick Bryant
54 170B N2704C
26248
Where should my crankcase tube terminate?
Mine is about 2 inches above the bottom lip of the cowl. The cowl has a 1.5 inch lip.
Does this sound right?
Mine drips a yellow goo when shut down.
Dick Bryant
54 170B N2704C
26248
- Wed Jun 26, 2019 11:44 am
- Forum: The Hangar
- Topic: large feet and rudder pedals
- Replies: 9
- Views: 18294
large feet and rudder pedals
Hello All Does anyone else have a problem with large feet. I can not apply full rudder without being on the brakes. I have been lowering my feet so I am just using my toes but then I can't get to the brakes. I think I need about a 1/2 in block on the bottom of the rudder pedal to keep the top of my ...
- Mon Oct 15, 2018 9:23 am
- Forum: The Pilot Lounge
- Topic: AOPA Oct 2018 article - Vince Lalomia
- Replies: 1
- Views: 10873
Re: AOPA Oct 2018 article - Vince Lalomia
I met Vince in 2014 at the AOPA fly in at Plymouth MA. I had not flown for 30 years, my father had passed away and I had some money to get back into flying. I went to the rusty pilots seminar and I volunteered to park aircraft during the fly in Sunday. In the afternoon they asked me to block the air...
- Thu Aug 30, 2018 11:34 am
- Forum: The Hangar
- Topic: BC alternator
- Replies: 4
- Views: 10162
BC alternator
Hi All
Has anyone tried to get a field approval for a BC 433-H 30 amp alternator?
I bought a C145-2 rebuilt engine for my 170B and it cam on it. It only weighs 4 pounds and it starts charging at 950 rpms.
Thanks
Dick Bryant
54 170B
Has anyone tried to get a field approval for a BC 433-H 30 amp alternator?
I bought a C145-2 rebuilt engine for my 170B and it cam on it. It only weighs 4 pounds and it starts charging at 950 rpms.
Thanks
Dick Bryant
54 170B
- Wed Jul 11, 2018 9:55 pm
- Forum: The Hangar
- Topic: Auto Valve oil drain valve
- Replies: 4
- Views: 11968
Auto Valve oil drain valve
Hi All
Has anyone changed the small shut off o-ring in a Auto Valve BJ1000AHS4X. It appears to be a square o-ring. Mine works but it is out and this is the time to change it.
It looks like a round o-ring would work but I want to do this right.
Thanks
Dick Bryant
1954 C-170B
26248
Has anyone changed the small shut off o-ring in a Auto Valve BJ1000AHS4X. It appears to be a square o-ring. Mine works but it is out and this is the time to change it.
It looks like a round o-ring would work but I want to do this right.
Thanks
Dick Bryant
1954 C-170B
26248