Search found 2172 matches
- Wed Mar 20, 2024 8:41 pm
- Forum: The Hangar
- Topic: Slooooooow 170b
- Replies: 15
- Views: 1035
Re: Slooooooow 170b
Welcome to the forum, somehow I think your engine may not be producing as much power as your flight mates but as George mentioned it could be a sum of issues. I know when I first had my plane with a high time continental, it ran smooth. When I went to overhaul it I found a cam lobe pretty much worn ...
- Sun Mar 10, 2024 9:01 pm
- Forum: The Hangar
- Topic: C170B Fuel Selector Valve
- Replies: 10
- Views: 850
Re: C170B Fuel Selector Valve
I’ve found in the past, somethings come down to an individuals physical differences, as in thin hands, long fingers and more twistable tongues. Creating the floating doubler nut plate certainly makes things easier.
- Sat Mar 02, 2024 4:40 pm
- Forum: The TradeMart
- Topic: AVCON - O-360 Motor Mount
- Replies: 1
- Views: 320
Re: AVCON - O-360 Motor Mount
Acorn in YEG is a good outfit, they rebuilt my engine mount and I had good dealings with them. Asking them to produce a new one would of course be an illegal act on their part to do so. Its a shame given the age of our aircraft and the state of GA that a licensed AME using certified parts cannot mai...
- Wed Feb 28, 2024 11:21 pm
- Forum: The Hangar
- Topic: Cracked Vertical Stab Bracket
- Replies: 14
- Views: 1429
Re: Cracked Vertical Stab Bracket
Aside from location, I think all the holes need to be reamed to size to avoid another crack.
- Sun Feb 25, 2024 9:44 pm
- Forum: The Hangar
- Topic: $170 Leaf Spring Bushing
- Replies: 20
- Views: 5010
Re: $170 Leaf Spring Bushing
I would reuse that part using plenty of grease / antiseize on the through bolt, but I sometimes tend to have Scottish tendencies.
- Sun Feb 25, 2024 4:36 pm
- Forum: The Hangar
- Topic: Mixture/Prop/Throttle replacement for 180hp 170B
- Replies: 11
- Views: 806
Re: Mixture/Prop/Throttle replacement for 180hp 170B
I thought the association might have the Avcon engine conversion docs in the library but when I found their listings the hyperlinks didn’t work, so Bruce or George might know the real story there. There’s purportedly a controls installation doc which might shed light but like some of early conversio...
- Sun Feb 25, 2024 6:44 am
- Forum: The Hangar
- Topic: Mixture/Prop/Throttle replacement for 180hp 170B
- Replies: 11
- Views: 806
Re: Mixture/Prop/Throttle replacement for 180hp 170B
Mine is very similar, i’ve routed it a bit more forward and away from the engine mount ( mine a 0-320 Doyn not a 360 ). I don’t think you have a problem unless of course the control isn’t smooth. I believe the Del-Air conversion C/S control routing is the same.
- Sat Feb 24, 2024 5:23 pm
- Forum: The Hangar
- Topic: Mixture/Prop/Throttle replacement for 180hp 170B
- Replies: 11
- Views: 806
Re: Mixture/Prop/Throttle replacement for 180hp 170B
I think it makes sense that there’s a loop in many 170 conversions. The governor (at least on my Lycoming is mounted on the rear case close to the firewall) operating lever to which the cable attaches is at right angles to the dash panel hence the push pull (inline with respect to the longitudinal a...
- Fri Feb 23, 2024 12:24 am
- Forum: The Hangar
- Topic: How To Remove Vertical Stab?
- Replies: 6
- Views: 555
Re: How To Remove Vertical Stab?
Well, my rear spar brackets are broken You mean more than just the right side? Taking the rudder off is easy, don’t lose the hardware or the bottom rudder attach bushing. Before you remove the stab get a straight rod and sight the hinge points to see whether they are aligned, (if you are in town yo...
- Mon Feb 19, 2024 5:38 pm
- Forum: The Hangar
- Topic: Cracked Vertical Stab Bracket
- Replies: 14
- Views: 1429
Re: Cracked Vertical Stab Bracket
Not a bad situation, the rudder will have to come off, but then you’re at it. Not sure about that washer (its corroded for one) may not be a NAS (it looks too wide) but like Gary mentioned I’d clean it up first as it appears the crack/ scratch/ mark or also goes into the skin at the forward edge whi...
- Thu Feb 08, 2024 3:29 am
- Forum: The Hangar
- Topic: 0-300 NEW STYLE Accessory Case
- Replies: 25
- Views: 1909
Re: 0-300 NEW STYLE Accessory Case
I would think there’s a bunch of old cases available too, heck I’ve got two gathering sawdust in the garage.
- Sat Feb 03, 2024 4:27 pm
- Forum: The Pilot Lounge
- Topic: Five weeks of adventure with my Super 170
- Replies: 41
- Views: 6246
Re: Five weeks of adventure with my Super 170
Didn’t want to disturb the flow Wolf with a comment. I’ve got a few pics of Montana from altitude but they never do it justice. Have always looked forward and enjoyed that portion of my trips. I often deviated from my route to take in another valley / ridge hoping to see wildlife or to just for the ...
- Sat Jan 27, 2024 11:44 pm
- Forum: The Hangar
- Topic: AVCON conversion boost pump
- Replies: 3
- Views: 461
Re: AVCON conversion boost pump
Have a look to see if the part number is stamped into the metal on the mounting flange of the pump.
- Thu Jan 25, 2024 11:00 pm
- Forum: The Hangar
- Topic: Cowling & Wing Screws?
- Replies: 10
- Views: 995
Re: Cowling & Wing Screws?
I wouldn’t use stainless. Reese will likely find out how hard these screws are to remove if they have been in there for some time. Should the heads deform on removal, drilling them out would be easier if they are just plain steel. Of course opening panels / trailing edge and spraying your favourite ...
- Thu Jan 25, 2024 2:10 am
- Forum: The TradeMart
- Topic: Louisiana 1953 170-B for sale (Posted for Ron Massicot)
- Replies: 3
- Views: 1486
Re: Louisiana 1953 170-B for sale (Posted for Ron Massicot)
Missed seeing and being in Ron and Connie’s company over the last few conventions. Hope their plane finds a good home.