Search found 21 matches
- Wed Oct 07, 2020 11:39 am
- Forum: The Hangar
- Topic: Flap play
- Replies: 3
- Views: 1899
Re: Flap play
The slots are fine. I guess I’m more worried about the side play and the little notch in the false spar from the bolt. I’ll see if I can get a picture Thursday.
- Wed Oct 07, 2020 12:36 am
- Forum: The Hangar
- Topic: Flap play
- Replies: 3
- Views: 1899
Flap play
We have been flying our 170 for over a year now. How much play (vertical and horizontal) should the flaps have? I noticed at the annual the a couple flap bolts have put a small notch in the flap false spar when they go to 40 degrees. I didn't notice it when we did the flap roller kit as it only does...
- Sat May 09, 2020 8:51 pm
- Forum: The Hangar
- Topic: Mixture creep
- Replies: 4
- Views: 2917
Mixture creep
My mixture creeps a little in flight. I was looking at the newer style clip 0513173-1 that Cessna has as superseding the three part lock. They want $200 for that little piece of metal. Does anyone have a better source for these or a handful laying around they would sell for a more reasonable price. ...
- Sat May 09, 2020 8:48 pm
- Forum: The Hangar
- Topic: Progressive Inspections
- Replies: 2
- Views: 2238
Progressive Inspections
Does anyone had their 170 on an approved progressive inspection program? My brother and I share our 170 so it spends six months in FL with him and six months in IL with me. I am an IA and he is an A&P. I have been tossing around the idea of him doing two phases and me doing two. If anyone has an...
- Mon Apr 06, 2020 1:17 am
- Forum: The Hangar
- Topic: Bartone Exhaust
- Replies: 87
- Views: 510150
Re: Bartone Exhaust
I would be interested. Following.
- Wed Jan 24, 2018 9:23 pm
- Forum: The Hangar
- Topic: How many shock mounts on a 54 gyro panel
- Replies: 2
- Views: 5336
Re: How many shock mounts on a 54 gyro panel
I figured, just wanted to make sure.
- Wed Jan 24, 2018 3:37 am
- Forum: The Hangar
- Topic: How many shock mounts on a 54 gyro panel
- Replies: 2
- Views: 5336
How many shock mounts on a 54 gyro panel
I have tried to search the old posts for this, but here goes. How many shock mounts are required on my 54 with gyros? My parts book says 6 but there are 9 holes. I'm sure it is a miss print but want to check before I put the panel back in. Thanks.
Tim
Tim
- Thu Nov 23, 2017 2:25 am
- Forum: The Hangar
- Topic: Oil Temp Gauge
- Replies: 4
- Views: 9109
Re: Oil Temp Gauge
Thanks for the reply
- Tue Nov 21, 2017 9:26 pm
- Forum: The Hangar
- Topic: Oil Temp Gauge
- Replies: 4
- Views: 9109
Oil Temp Gauge
Is this an original for a 1954 model?
- Fri Jul 21, 2017 9:22 pm
- Forum: The Hangar
- Topic: Grimes light part
- Replies: 1
- Views: 5278
Grimes light part
I wanted to see if anyone knew of a source for the little bulb contact piece in the socket that the wire gets crimped on. We have ran new wire in the airplane and and need to rewire the sockets. Any help would be appreciated.
Tim
Tim
- Thu Apr 06, 2017 4:07 pm
- Forum: The Hangar
- Topic: Wire routing for 1954 B
- Replies: 0
- Views: 19570
Wire routing for 1954 B
I took a bunch of pictures before we removed the old wires, however none of them show exactly where the wire bundles pas through the instrument panel on the sides. There are three holes and I know the one is fore the headset jack. If anyone have any pictures I would appreciate it. I tried searching ...
- Tue Dec 13, 2016 6:30 pm
- Forum: The Hangar
- Topic: Carb Overhaul
- Replies: 5
- Views: 9988
Re: Carb Overhaul
I failed to mention that it is the original carb on the original engine (as far as the logbooks say). Does anyone overhaul carbs and bring it up to standards?
- Mon Dec 12, 2016 11:49 pm
- Forum: The Hangar
- Topic: Carb Overhaul
- Replies: 5
- Views: 9988
Carb Overhaul
All, I have read a few threads about carb overhaul but few apply to my problem. My 170 hasn't flown since 1991 so the carb I took off has a two piece venturi that fell out as we were disassembling it. We also have a carb that has a one piece venturi that was on a shelf. The question is do I get the ...
- Sat Nov 19, 2016 1:54 pm
- Forum: The Hangar
- Topic: Another Rheostat Bites the Dust
- Replies: 13
- Views: 25305
Re: Another Rheostat Bites the Dust
Thanks. I guess I'll keep it where it is.
- Sat Nov 19, 2016 2:47 am
- Forum: The Hangar
- Topic: Another Rheostat Bites the Dust
- Replies: 13
- Views: 25305
Re: Another Rheostat Bites the Dust
I found it in the IPC. It says circuit breaker. What is it for?