Search found 365 matches
- Thu Nov 22, 2018 9:17 pm
- Forum: The Pilot Lounge
- Topic: A Funny Thing Happened on the way to the Forum
- Replies: 0
- Views: 22831
A Funny Thing Happened on the way to the Forum
This will be the first of two posts. I Will try to keep them both limited to the Readers Digest Version as opposed to the Michener version but, there is some technical stuff involved. I almost named this post “The best way to hide an elephant is leave it in plain sight”. This concerns what we learne...
- Tue Jul 10, 2018 12:01 pm
- Forum: The Hangar
- Topic: Air box for Avcon conversions and split cowling
- Replies: 4
- Views: 11663
Re: Air box for Avcon conversions and split cowling
Dave I got rid of all those airbox pieces and went with one piece that has been hassle free and doesn’t crack the cowlingvarea
- Wed Jul 04, 2018 5:01 pm
- Forum: The Hangar
- Topic: Split cowling for Avcon installations
- Replies: 0
- Views: 21602
Split cowling for Avcon installations
Ok from my previous post I couldn't add these photos. I originally modified my cowling to be installed with camlocs only and split it so the solid nose bowl is not an issue. See photos for how I did this. Airbox is not attached to cowling it is part of the engine so any vibration does not crack the ...
- Wed Jul 04, 2018 4:57 pm
- Forum: The Hangar
- Topic: Air box for Avcon conversions and split cowling
- Replies: 4
- Views: 11663
Air box for Avcon conversions and split cowling
Ok I'm hoping this lets me post my photos. I guess I can only post 5 and I have nine so I will post 5 here and maybe 5 more on another post. When I put my Avcon conversion on in the early 1990's. I knew the orange scat hose for the air on would be an issue. I always see them in poor condition with h...
- Thu Apr 26, 2018 10:18 pm
- Forum: The Hangar
- Topic: Interesting tach mode of failure
- Replies: 12
- Views: 19791
Re: Interesting tach mode of failure
Just so everyone knows I am sort of for the electronic tachometers. I have an old school Hartzell prop rpm checker and most steam gauge tachometers are off by at least 75 rpm and many lots more that go into 150 rpm plus. I have guys wanting their props or governors adjusted and I first do a tach che...
- Thu Apr 26, 2018 4:13 pm
- Forum: The Pilot Lounge
- Topic: Why Aerocet 2200's cost so much
- Replies: 1
- Views: 7900
Why Aerocet 2200's cost so much
I posted that I had a new pair of 2200 Aerocets that I could sell in the lower 48 or they would be transported to Alaska by the end of the month. I gave my contact information and almost all the inquiries were wanting to know how they could be 7000.00 more that Super Cub floats and rigging. It is re...
- Thu Apr 12, 2018 5:16 am
- Forum: The Hangar
- Topic: Replacement ELT Antenna
- Replies: 4
- Views: 11403
Re: Replacement ELT Antenna
Up here in Alaska they do not launch on a 121.5 ELT signal unless someone calls in and says an aircraft is overdue. I got this info from the Alaska Air Guard. they launch immediately on a 406 signal and the search area is half a kilometer in one sweep instead of 40 freaking square miles in multiple ...
- Wed Mar 28, 2018 5:18 pm
- Forum: The Pilot Lounge
- Topic: 80" CS Prop
- Replies: 3
- Views: 9134
Re: 80" CS Prop
I put the 80 inch on years ago and had greatly improved performance and very little airspeed loss
- Mon Mar 05, 2018 11:31 pm
- Forum: The Hangar
- Topic: Dynamic Propeller Balancing
- Replies: 17
- Views: 39714
Re: Dynamic Propeller Balancing
I balance propellers with an Aces balancer. I have had it for decades and get it certified annually. Anyway, unless their instructions have dramatically changed, the way the final balance weight is attached does not appear correct in the photo. I could be incorrect. When I balance them with that kin...
- Mon Mar 05, 2018 11:12 pm
- Forum: The Hangar
- Topic: landing gear/gearbox information
- Replies: 38
- Views: 57195
Re: landing gear/gearbox information
Guess I posted this reply in the incorrect forum. I copied and pasted it. Cheers I agree with George with how hard do you want to hit a brick wall. However these STC/mods need to be an analyzed a bit better before being incorporated. Unfortunately, I work on a lot of Cessna 180/185 aircraft...far in...
- Tue Feb 27, 2018 11:20 pm
- Forum: The Hangar
- Topic: The journey begins. 170B project.
- Replies: 117
- Views: 414553
Re: The journey begins. 170B project.
I agree with George with how hard do you want to hit a brick wall. However these STC/mods need to be an analyzed a bit better before being incorporated. Unfortunately, I work on a lot of Cessna 180/185 aircraft...far inferior to the 170 due to the ever failing trim system and the stinger tailwheel. ...
- Sun Feb 25, 2018 12:04 am
- Forum: The Hangar
- Topic: Door hinges
- Replies: 5
- Views: 9740
Re: Door hinges
Are they shown in the 170 IPC? I am out of state and don’t have ready access to my manuals. Also convalescing after a bad accident. They are attempting to PMA parts do we have a source? If anyone has gotten a PMA you understand what a time consuming and cumbersome process it is with little financial...
- Thu Feb 22, 2018 12:53 am
- Forum: The Hangar
- Topic: Door hinges
- Replies: 5
- Views: 9740
Door hinges
I have a request from a friend at McFarlane engineering. They want to make aftermarket door hinges. My serial number is 26669 so doesn’t apply. See below for what he is looking for What I’m needing in particular is a 170B with a serial number of 26996 or later, and I need to see photos of the cabin ...
- Tue Dec 19, 2017 6:45 am
- Forum: The Hangar
- Topic: Aircraft Parts Pricing / Shopping
- Replies: 8
- Views: 16531
Re: Aircraft Parts Pricing / Shopping
I make my own gaskets. At a nickel an hour I save a lot of money
- Tue Dec 19, 2017 6:35 am
- Forum: The Hangar
- Topic: Spark Plug Question
- Replies: 10
- Views: 21201
Re: Spark Plug Question
I have a Mil Spec somewhere for plugs. For quite some time Champion did not make the requirements which is 5000 ohms. I am flying blind here so may be inaccurate. Champion for years said this was not true. I have heard they eventually changed the resistor to meet the specs. You can tell the differen...