From the MX Library - Service Alerts. As stated above it requires using two cooper gaskets and NO fiber gasket.
download/file.php?id=16076
Search found 1348 matches
- Sat Dec 19, 2020 1:26 am
- Forum: The Hangar
- Topic: ****Alert**** - F+M Oil filter adapter gasket fail
- Replies: 83
- Views: 103147
- Fri Dec 11, 2020 4:41 pm
- Forum: The Hangar
- Topic: El Reno, F&M, Tempest Oil Filter Adaptor
- Replies: 0
- Views: 14036
El Reno, F&M, Tempest Oil Filter Adaptor
I ran across an article on the El Reno, F&M, Tempest Oil Filter Adaptor from the NTSB about loss of oil resulting in engine failure on adaptors with the fiber gaskets. I then found this document from Stratus Tools Technologies (manufacture or the adaptors) that tells you to replace the fiber gas...
- Wed Dec 09, 2020 3:11 pm
- Forum: The Hangar
- Topic: Tinnerman wire clip
- Replies: 5
- Views: 2936
Re: Tinnerman wire clip
I have been looking for those as well, or something that will replace them for a while with no luck.
- Tue Dec 01, 2020 4:47 am
- Forum: The Pilot Lounge
- Topic: Call Signs
- Replies: 36
- Views: 16756
Re: Call Signs
From the Airmans Information Manual: Contact Procedures Initial Contact. The terms initial contact or initial callup means the first radio call you make to a given facility or the first call to a different controller or FSS specialist within a facility. Use the following format: Name of the facility...
- Sun Nov 29, 2020 2:15 am
- Forum: The Pilot Lounge
- Topic: Call Signs
- Replies: 36
- Views: 16756
Re: Call Signs
I say yadda, yadda, yadda...
- Tue Nov 24, 2020 2:07 am
- Forum: The Pilot Lounge
- Topic: Stratux ADS-B
- Replies: 10
- Views: 6116
Re: Stratux ADS-B
This is the SD card with the new software already loaded, just swap out your old SD card and power it up.
https://www.amazon.com/dp/B01I0G15YU/re ... ab84572065
https://www.amazon.com/dp/B01I0G15YU/re ... ab84572065
- Fri Nov 13, 2020 4:05 pm
- Forum: The Hangar
- Topic: ‘48 170 “Ragwing” Fuel Pump Part Number
- Replies: 3
- Views: 1894
Re: ‘48 170 “Ragwing” Fuel Pump Part Number
Good post George, has anyone ever got approval or STC to reroute the fuel lines to eliminate the pump and check valve?
- Mon Oct 05, 2020 11:36 pm
- Forum: The Pilot Lounge
- Topic: Surefly mags
- Replies: 25
- Views: 33263
Re: Surefly mags
I roll my eyes a bit when I hear or read anecdotes from someone who has installed the latest gizmo on their airplane and claim “more horsepower”, etc. To be fair to Surefly, they make no claims of increased horsepower, their main marketing point is the low maintenance and longer service life than a...
- Mon Oct 05, 2020 2:33 pm
- Forum: The Pilot Lounge
- Topic: Surefly mags
- Replies: 25
- Views: 33263
Re: Surefly mags
The guy across the taxiway installed a Surefly SIM on his Grumman recently, with the variable timing option. Early reports talk about easier starts and more power. I'm pretty confident the "more power" claim is anecdotal, but it wouldn't surprise me if it was in fact true. The kicker was ...
- Sun Sep 27, 2020 2:38 pm
- Forum: The Hangar
- Topic: Rear Pax Headset Jack Locations
- Replies: 13
- Views: 13777
Re: Rear Pax Headset Jack Locations
I also have mine mounted on the hat shelf. I find this keeps the headsets and cords out of the way when rear passengers or getting in or out of the plane. Unlike Miles I mounted mine under the shelf.
- Thu Sep 24, 2020 2:54 pm
- Forum: The Hangar
- Topic: Yoke and Yoke Shaft Refinishing
- Replies: 38
- Views: 61134
Re: Yoke and Yoke Shaft Refinishing
Gary, what brand of stripper did you use, the real nasty stuff ?n2582d wrote:To soften the plastic coating. No scrapping needed, the stripper turned the coating into a gel. RinsIng with water and Scotchbrite pad removed the last of the coating.
- Mon Aug 17, 2020 2:18 pm
- Forum: The Hangar
- Topic: ADS-B IN
- Replies: 17
- Views: 16325
Re: ADS-B IN
I've been using a Stratux ADS-B in (not Stratus) which is a home brew system and its been working like a charm for several years now. It is a little clunkier then other units but you get Status 2S features for the price of a Scout.
- Thu Jul 02, 2020 7:10 pm
- Forum: The Hangar
- Topic: New to me 170B
- Replies: 19
- Views: 15176
Re: New to me 170B
If you are in Canada I don't think they will support Universal Access Transceivers (UAT) which is what the SkyBeacons use. Last I heard Canada was only going to support 1090 Mhz units.
- Thu Jun 11, 2020 2:37 am
- Forum: The Hangar
- Topic: Starter Replacement
- Replies: 5
- Views: 4296
Re: Starter Replacement
Overhaul is a good time to change to a lightweight starter, as the pinion shaft for the pull starter needs to be cut off its base, and that is best done off the engine. When I did mine in 2006 I went with the more expensive B&C because at the time the SkyTec was having some reliability problems...
- Mon May 18, 2020 11:48 pm
- Forum: The Hangar
- Topic: Main gear toe in
- Replies: 23
- Views: 14770
Re: Main gear toe in
In fact, the second SNL you posted implies that “all service information” previously published was “approved” which might include the Owner’s Manual service information. Certainly the information is the SAME info... therefore it could be said to be “approved”. Hmm...gotta go with Gary on this one, ...