Search found 2300 matches
- Tue Sep 12, 2006 1:25 am
- Forum: The Hangar
- Topic: Battery
- Replies: 57
- Views: 48362
RG battery
I e-mailed Concorde about Skip Koss' comment in the Sept. issue of AOPA that aircraft with under 50 amp generators should use flooded cell batteries rather than RG batteries. Here is his response: "I was miss-quoted in Steve Ells September 2006 AOPA PILOT article What I said or meant was that I...
- Fri Sep 08, 2006 4:18 pm
- Forum: The Hangar
- Topic: Battery
- Replies: 57
- Views: 48362
RG Batteries
In other words, ... my next battery will likely be a RG (recombinant gas) or gel-cell, for no other reason than to protect my expensive battery box. I'm thinking it's probably a lot cheaper to buy a battery with less longevity and add years to my battery box. George, if you switch to an RG battery ...
- Fri Aug 25, 2006 4:50 pm
- Forum: The Hangar
- Topic: Rudder out of rig
- Replies: 17
- Views: 10792
rudder return springs
Thomas,
Your guess is correct. The left rudder bar--the forward one-uses the "right return spring", p/n 0310196-3. This is mounted to the right side of the tunnel. Hope this left you with the right understanding!
Your guess is correct. The left rudder bar--the forward one-uses the "right return spring", p/n 0310196-3. This is mounted to the right side of the tunnel. Hope this left you with the right understanding!
- Fri Aug 25, 2006 3:23 am
- Forum: The Hangar
- Topic: Instrument panel support attachment
- Replies: 2
- Views: 2731
Doug, Thanks for the quick reply. The last picture was especially helpful. It appears that your installation differed from the IPC. The brace in the picture attaches to the outboard tab on the panel whereas the IPC shows that it attaches to the inboard set of tabs. Edit: I think the brace attaches t...
- Fri Aug 25, 2006 1:31 am
- Forum: The Hangar
- Topic: Instrument panel support attachment
- Replies: 2
- Views: 2731
Instrument panel support attachment
I have a '52 C-170B. It is missing both instrument panel braces that tie the stationary instrument panel to the firewall. (These can be seen on pg. 36 of the IPC -- fig. 19-50, p/n 0513000-6). Could someone describe them? Are they 1/2" "U" channels? angles? Where do they attach at the...
- Fri Aug 18, 2006 9:46 pm
- Forum: The Hangar
- Topic: C-145 Dampened Crankshaft and identification
- Replies: 11
- Views: 19731
dampened crankshafts
(Does this thread help indicate the importance of proper records during engine rebuilds?) The AI that did the overhaul on my O-300 only wrote "New Crankshaft" in the logbook without any supporting data or tags. Shortly after I bought the plane he had his certificate pulled by the FAA. Thi...
- Mon Jul 17, 2006 9:23 pm
- Forum: The Hangar
- Topic: Pilot Operating Handbooks
- Replies: 5
- Views: 3709
Steve,
You might have better luck asking for a copy of this Pilot's Operating Manual at the Cessna Pilot's Association. (http://www.cessna.org)
You might have better luck asking for a copy of this Pilot's Operating Manual at the Cessna Pilot's Association. (http://www.cessna.org)
- Sat Jul 08, 2006 5:58 pm
- Forum: The Hangar
- Topic: new member, new project...
- Replies: 21
- Views: 12708
C-175 tanks
George, Tanks :wink: for the response! I really like idea of extending the range with the C-175 tanks rather than using the Flint tanks or the aux. baggage tank. The Flint tanks are expensive ($4300) and, I imagine, reduce the roll rate/aileron effectiveness. The aux. baggage tank are hard to find a...
- Tue Jul 04, 2006 5:33 pm
- Forum: The Hangar
- Topic: new member, new project...
- Replies: 21
- Views: 12708
c-175 tanks
In looking at the TCDS for the C-175 it looks like one has to carry around a lot of unusable fuel -- anywhere from 54 to 63 lbs depending on the model. This seems like a high penalty for the additional 5 or 6 gals. of fuel one would have if one were to use these tanks in a C-170 . This weight would ...
- Sat Jun 17, 2006 1:44 am
- Forum: The Hangar
- Topic: CARGO NET
- Replies: 11
- Views: 8084
Cargo tie-down
They want $120 for two of those fancy jobs at http://www.jacobsonmachine.com . If red is not your color you can get these purple ones which attach to Cessna seat tracks for "only" $85 a piece from http://www.cargosystems.com . http://www.cargosystems.com/55020x.jpg Cargo rings which attach...
- Thu Jun 15, 2006 3:52 am
- Forum: The Pilot Lounge
- Topic: Batteries
- Replies: 15
- Views: 10083
Battery Power
That's not exactly apples to apples, tho'. Homebuilts don't meet a LOT of requirements of certificated aircraft. They can use lawn-tractor batteries from Pep Boys! (of course I hear there's a 170 in California that does as well.) Years ago I annualled a J-3 that had a field approval for a motorcycl...
- Wed Jun 14, 2006 7:55 pm
- Forum: The Pilot Lounge
- Topic: Batteries
- Replies: 15
- Views: 10083
Sealed Batteries
In a somewhat dated article at http://www.aeroelectric.com/articles/battery.pdf Bob Nuckolls sings the praises of the RG battery, "I recommend switching to an RG battery at the next opportunity; there's nothing to maintain on this truly sealed battery, just keep an eye on charging voltage. Conv...
- Wed Jun 14, 2006 4:01 pm
- Forum: The Hangar
- Topic: Repairs vs Maintenance
- Replies: 6
- Views: 4262
If you want it straight from the horse's (some have suggested another equine) mouth, you can listen to Bill O'Brien for a price on http://www.amtonline . (It's a site where IA's can go to maintain currency instead of attending a maintenance seminar). Bill is the FAA National Resource Specialist, He ...
- Wed May 31, 2006 7:18 am
- Forum: The Hangar
- Topic: panel shock mounts
- Replies: 30
- Views: 35614
Instrument panel shock mounts
How is it that you have 10 shock mounts? Both the early and later style panels only call for 6 on the standard panels (fig. 40-3 and 43-2)? I ordered my shock mounts from Aircraft Spruce--they appear to be identical to the original. I have the early style 170B panel. I was curious why somebody would...
- Mon May 08, 2006 3:39 am
- Forum: The Hangar
- Topic: New Firewall
- Replies: 6
- Views: 9609
Firewall
On http://www.cessnaparts.com the firewall sheet, p/n 0513101-3, is $419.90. I looked into making my own firewall but decided that by the time I bought the tooling to make the dimpled recesses it would be cheaper and easier to just buy one. I bought a stainless one from Del-Air for $383.96. This inc...